Therefore, make sure the sample rate and bit depth match the appropriate settings for your audio device and that the input and output sample rates are set to the same value as the software you wish to use your device with. In short, most sound issues stem from not having the correct audio input or output device selected, un-muted or at the correct volume or sample rate. You can set the sample rate and bit depth in the 'Format' pop-up menus. In the situation where you would like to set up surround speaker configuration, click 'Configure Speakers' followed by the type of configuration you prefer. In most cases, leave the 'Clock source' pop-up menu on the default setting unless you know that you want the clock source to be a particular device. The settings should be optimal by default, but you can manually alter volume and sample rate as described earlier. An article further down this page discusses how to work around this problem. While doing that, look out for the sample-rate of the Digital Input (if it is present in your system) and if that can be set to 48 KHz or if it goes back to 44.1 KHz on its own - which indicates the 44.1 digital i/o issue. It is important that this is done when all applications are closed. For example, when using Source-Connect at 48 KHz., make sure your audio device sample rates are also set to 48 KHz. Inspect the devices and their sample rates and set them to the required value if necessary.Then, open Audio Midi Setup (you can find it in Utilities, inside your computer's Applications folder).If necessary, install any software included with the devices by referring to the documentation that comes with them.

Firstly, connect your audio devices to your Mac.Otherwise you may only be able to mute or unmute a channel. For example, if the device supports volume control, you can adjust the volume for each channel.

What you can change with the Audio Midi Setup depends on the audio device you are using. microphones and multichannel audio interfaces), configure output speakers, set sample/clock rates and control audio levels. We can turn such frustration into joy by managing the audio midi setup :)Ī very important tip for you when using the Audio Midi Setup on Mac OSX: You can use the Audio Midi Setup to configure audio channels and input and output devices (e.g. Little is more frustrating to anyone recording sound on a Mac than to plug in, play some audio and hear horrible playback or nothing at all. You check the audio connections multiple times and everything seems to be fine but what you get in your monitors/headphones is noise or complete silence. Tip 1: Using the Audio Midi Setup on Mac OSX to verify settings and set sample-rates of your devices This article contains tips and tricks to use Source Elements products on Macįor Windows tips, check this article instead.

Macos multiple audio output